Talking about health issue, especially in commercial building and any close area room, there is no air condition product that concerns the air quality that is breathed in and out by any living things in the closed system circulation. Our clean air condition is the first air condition cassette type that is using a HEPA / ILPA filter. By this filter, the target is to filter any bacteria, dust virus by the HEPA / ULPA Filter.

There are 2 advantages of this product that others’ do not have:

1. The product will spread not only cool air and dehumidified, but also clean air. Resulting cleaner and healthier air environment inside the room.
2. Talking other advantages is the air that is coming from the unit is a unidirectional flow, which makes the room cleaner.

The product can be used by chiller system or by Direct Expansion system. Any of those will give a good clean and healthier air to be spread out through the room and filtered by HEPA / ULPA Filter.

General Specification:

Capacity               : 10.000 – 50.000 Btuh

Filter                      : ULPA U15 / HEPA H13 / HEPA H14

Air Flow                : 300 – 1500 Cfm

Material                : Galvanil Powder Coating

Dehumidifier is a unit that will condition the moisture inlet air so that the outlet air will have a certain targeted moisture content. Out product system is by outing the inlet temperature down, until it condensates and resulting the decrement of moisture content of the process air, then it will be heated up in order to get certain humidity.

By the fact that total calories to regenerate dehumidifier media, for melting ice is less than the heat to evaporate water, out product will give more efficient regarding the power consumption for dehumidifying unit

1g of ice requires 80 calories to melt

1g of water requires 540 calories to evaporate

For direct expansion system, not only it can be more efficient in the way it was stated above, but also our product will use the ‘waste’ outdoor heat in order to help reheating the air so that has it will help to reheat the air.

General Specification :

Capacity              : 50.000 Btuh – 2.000.000 Btuh

Air Flow               : 500 cfm – 60.000 Cfm

Filter                     : Pre G4/ Medium (F6 – F9) / HEPA (H13)

Heating               : Hot Gas / Steam Coil / Hot Water  Coil / Electric Heater

Cooling                : Chiller / Direct Expansion

Concerning about the air quality of a building, storage, process room in industry or any other enclose room, our air handling unit will provide any inquiries regarding air parameter.

Temperature, Humidity, Pressurized room / chamber, Clean room facility, fresh Air Unit, Etc.

By using out technology of Bag in Bag out unit, low noise level, low vibration level, no thermal bridge and could be combine with Human Machine interface and Building Automation system, our Air Handling Unit product will definitely five the best output and solution. Not Just by the parameters required, but also resulting in clean condition and also energy efficiency.

Our air handling unit will guarantee that there will be no condensation happen in outside of indoor unit

General Specification :

Capacity               : 50.000 Btuh – 2.000.000 Btuh

Air Flow                : 500 cfm – 60.000 Cfm

Filter                      : Pre G4/ Medium (F6 – F9) / HEPA (H13)

Cooling                 : Chiller / Direct Expansion

Storing material or product, could be tricky sometimes. Usually for keeping material or product, the parameter required is temperature only. However, sometimes, when the product or material is in open condition, without any primary packaging, then sometimes it needs also humidity parameter.

Our product called as cool dry storage refrigeration, not only could provide low temperature parameter, but also lower and controllable humidity parameter.

General Specification :

Capacity               : 50.000 Btuh – 400.000 Btuh

Cooling                 : Chiller / Direct Expansion

Heating                : Hot Gas / Steam Coil / Hot Water  Coil / Electric Heater